PE Welded Shell Jaw Crusher

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shandong

  • Validity to:

    Long-term effective

  • Last update:

    2017-10-12 14:32

  • Browse the number:

    199

Send an inquiries
+
Yantai Jinpeng Mining Machinery Co.,Ltd
Contactaixin:

Contactaixin:

jinpeng(Mr.)  

Email:

telephone:

phone:

Area:

Shandong

Address:

No. 11, Fuzhou Road, Yantai Development Zone, Shandong

Website:

http://www.chinaminingepc.com/ http://jinpeng.yz-bh.com/

+

Jaw Crusher

Operation Manual

I .Introduction

This series jaw crusher is suitable for laboratory and production units in metallurgy, mining, geology, coal, cement, light industry, chemical industry, electric power, building materials, commodity inspection, colleges and universities and scientific research department, to do 1st crushing, or 2nd crushing, or 3nd crushing. It is known for its high efficiency, uniform particle size.

II. Precautions

1. Install it on concrete foundation and connect it with ground wire.

2. The motor's rotation direction should be in accordance with the arrow on the pulley.

3. Before start, should make sure the crushing cavity clean.

4. Feed the material only after the smooth operation of the machine.

5. Move the screw (figure 13) and the handle (figure 12) to adjust the particle size.

6. When stop the machine, should first stop feeding and make sure the material empty in the cavity

7. If the block of the material in the cavity causes shutdown, make sure turn off the power immediately. Start again after the troubleshooting.

8. No peeking or moving the material in the cavity during the operation.

9. No adjustment, cleaning or maintenance during the operation.

III. Main Technical Parameters

Model

100×60

100×100

100×125

150×125

Inlet Dimension

100×60mm

100×100mm

100×125mm

150×125mm

Feed Particle Size

≤50mm

≤80mm

≤100mm

≤120mm

Discharge Particle Size

0.1-1.5mm

1-25mm

2-35mm

4-45mm

Rotating Speed

600r/min

600r/min

375/min

375r/min

Capacity

45-550kg/h

60-850kg/h

300-2000kg/h

500-3000kg/h

Power

1.5kw

2.2kw

3kw

3kw

IV. Structure Diagram

1.Pullery 2.Moving Jaw Bearing 3.Moving Jaw Cover 4. Upper Eccentric Bearing 5. Upper Eccentric Bearing's Seat 6. Upper Eccentric Bearing's Cover 7. Upper Eccentric Shaft 8. Moving Jaw Cover 9. Moving Jaw Brace 10. Lower Shaft Sleeve 11. Lower Shaft 12. Handle 13. Strew 14.Base 15.Motor 16. Belt 17. Belt Shield 18. Moving Jaw

19. Inlet 20. Moving Jaw Plate 21. Fixed Jaw Plate 22. Body 23. Material Box